LUKS

From David's Wiki
Revision as of 21:23, 30 October 2020 by David (talk | contribs)
\( \newcommand{\P}[]{\unicode{xB6}} \newcommand{\AA}[]{\unicode{x212B}} \newcommand{\empty}[]{\emptyset} \newcommand{\O}[]{\emptyset} \newcommand{\Alpha}[]{Α} \newcommand{\Beta}[]{Β} \newcommand{\Epsilon}[]{Ε} \newcommand{\Iota}[]{Ι} \newcommand{\Kappa}[]{Κ} \newcommand{\Rho}[]{Ρ} \newcommand{\Tau}[]{Τ} \newcommand{\Zeta}[]{Ζ} \newcommand{\Mu}[]{\unicode{x039C}} \newcommand{\Chi}[]{Χ} \newcommand{\Eta}[]{\unicode{x0397}} \newcommand{\Nu}[]{\unicode{x039D}} \newcommand{\Omicron}[]{\unicode{x039F}} \DeclareMathOperator{\sgn}{sgn} \def\oiint{\mathop{\vcenter{\mathchoice{\huge\unicode{x222F}\,}{\unicode{x222F}}{\unicode{x222F}}{\unicode{x222F}}}\,}\nolimits} \def\oiiint{\mathop{\vcenter{\mathchoice{\huge\unicode{x2230}\,}{\unicode{x2230}}{\unicode{x2230}}{\unicode{x2230}}}\,}\nolimits} \)

LUKS encryption

Getting Started

See Archwiki: dm-crypt/Device encryption.

Encrypting a device

  • Setup encryption
cryptsetup -v --type luks1 --cipher aes-xts-plain64 --key-size 512 --hash sha512 \
           --iter-time 5000 --use-urandom --verify-passphrase luksFormat "${DEVICE}"
  • Open encrypted drive
cryptsetup open "${DEVICE}" "${NAME}"
  • Create a partition
mkfs.fstype "/dev/mapper/${NAME}"
# E.g.
# mkfs.ext4 /dev/mapper/luksdrive1
  • Securely wipe the unused portion of the drive
    • Do this to prevent cryptographic attacks and to overwrite existing data on the drive
dd if=/dev/zero of=<file_somewhere> status=progress
# Delete the file afterwards

Mounting

# Open the encrypted drive
cryptsetup open "${DEVICE}" "${NAME}"
# Mount your partition
mount -t ext4 /dev/mapper/${NAME} "${MOUNT_LOCATION}"

Unmounting

# Unmount your partition
umount "${MOUNT_LOCATION}"
# Close the decrypted drive
cryptsetup close ${NAME}

Encrpytion Options

  • You can see defaults using cryptsetup --help.
  • --type options
    • luks defaults to luks1 on cryptsetup < 2.1.0, luks2 on cryptsetup >= 2.1.0
    • luks1 is the standard version of LUKS.
    • luks2 is a new version released in Dec 2017. Older versions of Grub (before 2.06 or June 2020) do not support booting from LUKS2.
    • plain is dm-crypt plain mode. Avoid this unless you know what you're doing.
    • loopaes Avoid this as well.
    • tcrypt Use this for mounting older truecrypt volumes.
  • --iter-time dynamically determines the number of iterations used to hash your password. The number of iterations is determined when creating the luks key. E.g. 5000 means hash for 5 seconds and use that many iterations. You can see the number of iterations for each key with cryptsetup luksDump <device>.
defaults

defaults on Ubuntu 18.04

Default compiled-in device cipher parameters:
	loop-AES: aes, Key 256 bits
	plain: aes-cbc-essiv:sha256, Key: 256 bits, Password hashing: ripemd160
	LUKS1: aes-xts-plain64, Key: 256 bits, LUKS header hashing: sha256, RNG: /dev/urandom

Benchmark

cryptsetup benchmark
Example Output
# Tests are approximate using memory only (no storage IO).
PBKDF2-sha1      1213629 iterations per second for 256-bit key
PBKDF2-sha256    1524093 iterations per second for 256-bit key
PBKDF2-sha512    1082121 iterations per second for 256-bit key
PBKDF2-ripemd160  648069 iterations per second for 256-bit key
PBKDF2-whirlpool  421453 iterations per second for 256-bit key
argon2i       4 iterations, 875179 memory, 4 parallel threads (CPUs) for 256-bit key (requested 2000 ms time)
argon2id      4 iterations, 889195 memory, 4 parallel threads (CPUs) for 256-bit key (requested 2000 ms time)
#     Algorithm |       Key |      Encryption |      Decryption
        aes-cbc        128b       542.7 MiB/s      2192.7 MiB/s
    serpent-cbc        128b        67.3 MiB/s       459.9 MiB/s
    twofish-cbc        128b       140.6 MiB/s       285.8 MiB/s
        aes-cbc        256b       405.3 MiB/s      1701.8 MiB/s
    serpent-cbc        256b        71.6 MiB/s       459.5 MiB/s
    twofish-cbc        256b       146.6 MiB/s       287.1 MiB/s
        aes-xts        256b      1421.6 MiB/s      1449.2 MiB/s
    serpent-xts        256b       455.9 MiB/s       444.0 MiB/s
    twofish-xts        256b       284.2 MiB/s       286.3 MiB/s
        aes-xts        512b      1187.2 MiB/s      1177.9 MiB/s
    serpent-xts        512b       454.7 MiB/s       446.1 MiB/s
    twofish-xts        512b       284.9 MiB/s       286.5 MiB/s

Adiantum

If you're running a device which does not support AES instructions (e.g. Raspberry Pi), you may be interested in Adiantum[1].
Adiantum is an encryption mode by Google which uses ChaCha12 for block encryption. It is included in Linux kernel v5.0.

Creation
cryptsetup -v --type luks2 --cipher xchacha12,aes-adiantum --sector-size 4096 \
           --key-size 256 --hash sha512 --iter-time 5000 --use-urandom \
           --verify-passphrase luksFormat <device>
Benchmark[2]
cryptsetup benchmark -c xchacha12,aes-adiantum -s 512

Scripts

mount_drives.sh
#!/bin/bash

function mount_luks {
    local fstype=$1
    local device=$2
    local name=$3
    local mountpoint=$4
    if [ ! -b /dev/mapper/"$name" ]
    then
        sudo cryptsetup open "$device" "$name"
    fi
    sudo mkdir -p "$mountpoint"
    sudo mount -t $fstype /dev/mapper/"$name" "$mountpoint"
}

mount_luks ext4 /dev/disk/by-id/<drive> lukscrypt1 /media/lukscrypt1
unmount_drives.sh
#!/bin/bash

function unmount_luks {
    local name=$1
    local mountlocation=$2
    sudo umount "$mountlocation" && \
    sudo rm -r "$mountlocation"
    sudo cryptsetup close "$name"
}

unmount_luks lukscrypt1 /media/lukscrypt1

Resources

References