Badblocks: Difference between revisions
(→Usage) |
(→Usage) |
||
Line 14: | Line 14: | ||
* <code>-t ''test_pattern''</code> Test pattern. Select from [random, | * <code>-t ''test_pattern''</code> Test pattern. Select from [random, | ||
To save the list of bad blocks, you need to run <code> | To save the list of bad blocks, you need to run <code>e2fsck</code> or <code>mkfs.ext4</code>: | ||
* <code>sudo e2fsck -fcck /dev/device</code> | * <code>sudo e2fsck -fcck /dev/device</code> | ||
** <code>-f</code> force check | ** <code>-f</code> force check |
Revision as of 01:20, 4 July 2020
Badblocks is a tool for detecting bad blocks in your hard disk.
Usage
The following will write to every block and read back to identify the number of bad blocks.
This is a destructive test.
badblocks -wsv -b 4096 /dev/sdg
-w
do a destructive write test-s
show progress-v
verbose-b num
block size. Use 4096 typically.-p num
do num iterations. Typically 1 is sufficient.-t test_pattern
Test pattern. Select from [random,
To save the list of bad blocks, you need to run e2fsck
or mkfs.ext4
:
sudo e2fsck -fcck /dev/device
-f
force check-cc
non-destructive write test-k
add bad blocks to bad blocks list
mkfs.ext4 -cc /dev/device