Wipe Disks: Difference between revisions
No edit summary |
|||
Line 8: | Line 8: | ||
</pre> | </pre> | ||
== | ==SATA SSD Secure Erase== | ||
[https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase] | [https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase] | ||
Revision as of 02:15, 22 January 2023
For HDDs, you need to overwrite everything.
For SSDs, the BIOS can typically invoke a secure erase.
HDDs - Using shred
shred -v -n1 /dev/sda
SATA SSD Secure Erase
https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase
Generally you do not want to write a bunch of zeros or random data to SSDs which would create significant wear. For performance reasons, SSDs typically encrypt data internally. A secure erase on an SSD will just generate a new internal encryption key, taking only a few minutes and avoiding unnecessary wear.
DEVICE=/dev/sdb
# Check if device is frozen
# On Ubuntu live, you may need to sleep and wake the system
sudo hdparm -I $DEVICE
# Set a password to Eins
sudo hdparm --user-master u --security-set-pass Eins $DEVICE
# Check that the master password is enabled
sudo hdparm -I /dev/sda
# Run secure erase (wipes internal encryption key)
sudo hdparm --user-master u --security-erase Eins $DEVICE
# Or for secure erase enhanced (takes longer, wipes multiple times)
sudo hdparm --user-master u --security-erase-enhanced Eins $DEVICE
# After a few minutes, check that the master password is disabled
sudo hdparm -I /dev/sda