Kubernetes: Difference between revisions

From David's Wiki
Line 6: Line 6:
Kubernetes runs applications across nodes which are physical or virtual machines.<br>
Kubernetes runs applications across nodes which are physical or virtual machines.<br>
Each node contains a kubelet process, a container runtime, and possibly one or more pods.<br>
Each node contains a kubelet process, a container runtime, and possibly one or more pods.<br>
Pods contain resources needed to host your application including volumes and one or more containers.
Pods contain resources needed to host your application including volumes and containers.<br>
 
Typically you will want one container per pod since deployments scale by creating multiple pods.
Typically you will want one container per pod since deployments scale by creating multiple pods.



Revision as of 01:13, 19 September 2021

Kubernetes, also known as K8s, is a container orchestration service by Google.
It supposedly has a harder learning curve than docker-swarm but is heavily inspired by Google's internal borg system.

Getting Started

Background

Kubernetes runs applications across nodes which are physical or virtual machines.
Each node contains a kubelet process, a container runtime, and possibly one or more pods.
Pods contain resources needed to host your application including volumes and containers.
Typically you will want one container per pod since deployments scale by creating multiple pods.

Installation

For local development, you can install minikube.
Otherwise, install kubeadm.

kubeadm

kubeadm install

Install Commands
# Setup docker repos and install containerd.io
sudo apt update
sudo apt-get install \
    apt-transport-https \
    ca-certificates \
    curl \
    gnupg \
    lsb-release
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
echo \
  "deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu \
  $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
sudo apt update && sudo apt install containerd.io

cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
br_netfilter
EOF

cat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sudo sysctl --system

sudo apt-get install -y apt-transport-https ca-certificates curl
sudo curl -fsSLo /usr/share/keyrings/kubernetes-archive-keyring.gpg https://packages.cloud.google.com/apt/doc/apt-key.gpg
echo "deb [signed-by=/usr/share/keyrings/kubernetes-archive-keyring.gpg] https://apt.kubernetes.io/ kubernetes-xenial main" | sudo tee /etc/apt/sources.list.d/kubernetes.list
sudo apt-get update
sudo apt-get install -y kubelet kubeadm kubectl
sudo apt-mark hold kubelet kubeadm kubectl



# Configure containerd
cat <<EOF | sudo tee /etc/modules-load.d/containerd.conf
overlay
br_netfilter
EOF

sudo modprobe overlay
sudo modprobe br_netfilter

# Setup required sysctl params, these persist across reboots.
cat <<EOF | sudo tee /etc/sysctl.d/99-kubernetes-cri.conf
net.bridge.bridge-nf-call-iptables  = 1
net.ipv4.ip_forward                 = 1
net.bridge.bridge-nf-call-ip6tables = 1
EOF

# Apply sysctl params without reboot
sudo sysctl --system

sudo mkdir -p /etc/containerd
containerd config default | sudo tee /etc/containerd/config.toml
sudo systemctl restart containerd

# Systemd cgroup
sudo vim /etc/containerd/config.toml

# Under this line, add the line below.
#  [plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc.options]
#    SystemdCgroup = true
sudo systemctl restart containerd
Control Plane Init
# Disable swap
sudo swapoff -a
# Comment out any swap in /etc/fstab
sudo kubeadm init \
  --cri-socket=/run/containerd/containerd.sock \
  --pod-network-cidr=10.0.0.0/16
<br />
# Setup calico networking
kubectl apply -f https://docs.projectcalico.org/manifests/calico.yaml

# (Optional) Remove taint on control-node to allow job scheduling
kubectl taint nodes --all node-role.kubernetes.io/master-
Add worker nodes

Run the following on worker nodes.

# Disable swap
sudo swapoff -a
# Comment out any swap in /etc/fstab
# Add the line to join the cluster here
# kubeadm join <ip>:6443 --token <...> --discovery-token-ca-cert-hash <...>
Notes

Pods per node

increase pods per node
By default, Kubernetes allows 110 pods per node.
You may increase this up to a limit of 255 with the default networking subnet.
For reference, GCP GKE uses 110 pods per node and AWS EKS uses 250 pods per node.

kubectl

In general you will want to create a .yaml manifest and use apply, create, or delete to manage your resources.

nodes

kubectl get nodes

pods

kubectl get pods
kubectl describe pods

# Access a port on a pod
kubectl port-forward <pod> <localport:podport>

deployment

kubectl get deployments
kubectl logs $POD_NAME
kubectl exec -it $POD_NAME -- bash

# For one-off deployments of an image.
kubectl create deployment <name> --image=<image> [--replicas=1]

proxy

kubectl proxy

service

Services handle routing to your pods.

kubectl get services

kubectl expose deployment/<name> --type=<type> --port <port>
kubectl describe services/<name>

run

https://gc-taylor.com/blog/2016/10/31/fire-up-an-interactive-bash-pod-within-a-kubernetes-cluster

# Throw up a ubuntu container
kubectl run my-shell --rm -i --tty --image ubuntu -- bash
kubectl run busybox-shell --rm -i --tty --image odise/busybox-curl -- sh

Services

Documentation

Services handle networking.
For self-hosted/bare metal deployments, there are two types of services.

  • ClusterIP - This creates an IP address on the internal cluster which nodes and pods on the cluster can access. (Default)
  • NodePort - This exposes the port on every node. It implicitly creates a ClusterIP and every node will route to that. This allows access from outside the cluster.
  • ExternalName - uses a CNAME record. Primarily for accessing other services from within the cluster.

On managed deployments (e.g. AWS EKS, GKE) you also have

  • LoadBalancer - fires up the provider's load balancer

By default, ClusterIP is provided by kube-proxy and performs round-robin load-balancing to pods.

Ingress

Ingress | Kubernetes
Ingress is equivalent to having a load-balancer / reverse-proxy pod with a NodePort service.

Installing an Ingress Controller

See ingress-nginx to deploy an ingress controller.

Autoscaling

Horizontal Autoscale Walkthrough
Horizontal Pod Autoscaler

You will need to install metrics-server.
For testing, you may need to allow insecure tls.

Accessing External Services

access mysql on localhost
To access services running outside of your kubernetes cluster, including services running directly on a node, you need to add an endpoint and a service.

Example
apiVersion: v1
kind: Service
metadata:
  name: t440s-wireguard-service
spec:
  type: ClusterIP
  ports:
    - protocol: TCP
      port: 52395
      targetPort: 52395
---
apiVersion: v1
kind: Endpoints
metadata:
  name: t440s-wireguard-service
subsets:
  - addresses:
      - ip: 192.168.1.40
    ports:
      - port: 52395

Devices

Generic devices

See https://gitlab.com/arm-research/smarter/smarter-device-manager
and https://github.com/kubernetes/kubernetes/issues/7890#issuecomment-766088805

Intel GPU

See https://github.com/intel/intel-device-plugins-for-kubernetes/tree/main/cmd/gpu_plugin

After adding the gpu plugin, add the following to your deployment.

apiVersion: apps/v1
kind: Deployment
spec:
  template:
    spec:
      containers:
          resources:
            limits:
              gpu.intel.com/i915: 1

Variants

minikube

minikube is a tool to quickly set up a local Kubernetes cluster on your PC.

kind

k3s

k3s is a lighter-weight Kubernetes by Rancher Labs.

Resources